Category: PowerElectronics

All three solar powered circulation pumps are up and running

After testing the first solar panel powered pump for more than a month, we recently installed the solar panels on the second pump shed. It took a little longer to get the solar controller wired up to another hand wired prototype pump motor controller, but today was the first day that that was turned on…


Pond circulation pump has been on nonstop for almost a month

Pond circulation pump has been on nonstop for almost a month, and it is still going strong. 🙂 After fixing the problems with the pump motor controller circuit, we left the motor on 24 hours per day and 7 days per week running off of only the 2 solar panels next to it. I am…


Solar powered circulation pump update

On December 23, I was quite happy that the new prototype pump controller circuit didn’t blow out in the 30 seconds or so that it took to burn out before I worked out a solution to the voltage spike issue. From that point, I left the pump running 24 hours a day until today, and…


First real solar powered pump test

Today I ran the solar powered pump the entire day for the first time. I am very pleased with the results. Ever since I solved the voltage spike issues we’ve been having with all of our power electronics circuits over the years, I’ve been very excited to actually try out the new pump controller circuit…


Power switching problem solved! It only took me about 5 years.

In order to solve the long time problems plaguing my attempts at creating fast switching high power electronics circuits, I’ve decided to take a crack at simulating it using ngspice. Here is a view of the kinds of ringing I am getting whenever the FET opens at load: The very large spike (too large to…


First attempts at modelling a FET in ngspice

In this post, I will show some simple experiments I ran to adjust the built in FET component of ngspice to model a particular FET. This follows up on this previous post where I showed how to install ngspice and run some preliminary experiments to model a zener diode’s behavior in a circuit. The FET…


My evolving struggle with power electronics (technical)

https://en.wikipedia.org/wiki/File:Toronto_Propane_Explosion.jpg This post is a bit technical, but it summarizes my (mostly failed) experiences with power electronics over the past 5-10 years and my recent progress towards getting power electronics into our knowledge base. I’ve been generally interested in electronics since I was a child, and more specifically interested in it since I met my…