Over the past few days we stitched the main hull pieces together: It is starting to look like a boat now. 😄
PocketShip: Scarfing the plywood and making the mold for the hull
We assembled the mold for the hull and placed the keelson inside: While we were scarfing the longer plywood hull pieces:
PocketShip: Melting and pouring lead
Today we melted lead and poured it into the compartments for the ballast in the keel as well as a weight in the centerboard. These will be covered in resin and fiberglass to contain it and reinforce the compartments.
PocketShip : Laying out the keel
Assembling the keel port, where the centerboard slides inside. Keel nose was made by gluing pieces of wood together and grind in shape with a table saw. Laying out the parts on a table to confirm the dimensions before gluing them together.
PocketShip: Building the keel and centerboard
This will be the centerboard Making a rabbet on the edge. Glueing the centerboard together with thickened resin. We received the rest of the timber for the boat this afternoon.
PocketShip: Cutting all the parts
We are starting to build the PocketShip from plans. All of the plywood parts are now cut and we are moving on to build the keel.
-
Recent Posts
Recent Comments
Archives
Categories