This sled is for mounting a small 3-5hp outboard motor between the two hulls and being able to raise and lower the motor out of the water…
MADNESS : POD & CABIN
We’ve been too busy building and got very behind on posting to the blog, so here are a few pictures of the Madness pod/cabin that is above the main hull, which is mostly completed now.
MADNESS : RUDDER & RUDDER TRUNK
We’ve been busy building and got very behind on posting to the blog, so here are a few pictures of the Madness rudder and rudder trunk build. RUDDER Rudder is Reinforce with Carbon Fiber Strip RUDDER TRUNK
MADNESS : CROSS BEAM (AKA)
We’ve been busy building and got very behind on posting to the blog, so here are a few pictures of the Madness crossbeam (aka) build…
MADNESS : MAIN HULL (VAKA)
We’ve been too busy building and got very behind on posting to the blog, so here are a few pictures of the Madness main hull build, which is mostly completed now. Deck Panel Main Sheet Strut
